Seat Cutting Tool For Compression Leak
Diesel Fuel Injectors Mercedes, Mazda, Jeep, Ford Transit, Land Rover etc (8PCS)

SA-3636G

This is also one our most popular seat cutting tool sets. This specialised tool has been developed to clean carbon from the injector bore and rectify injector seat non-conformity.

Identify injector “blow-by” exists (The leaking of combustion gas from cylinder through the injector seating washer, the blow-by causes starting symptoms and poor running, excessive smoke, tar build-up, loss and noise of compression).

To use tool
1: Gain access to the injectors and remove them (you may need injector removal tool).

2: Select required reamer onto pilot post and tighten internal hex screw.

3: Place assembled cutter into injector recess. Using the T bar and socket supplied: apply only a small amount of pressure whilst turning the cutter in a clockwise direction only. Use a small amount of light lubricant whilst performing the cut to reduce chattering and help to give a flat cut. Do not over cut the seat, only remove enough metal to form a good seat

4: Thoroughly clean the seat and remove all shavings.

5: Fit injectors using new heat shield washers as per manufacturers’ instructions.

Note: These quality tools are made in Taiwan by the original manufacturer and not cheaper made copies which is very common these days.

specialist Tools Australia (Responsive Engineering) is an Australian company dedicated to finding innovative solutions to complex problems. We develop, manufacture and Import specialist products and diagnostic tools for the automotive industry and pride ourselves in providing you with a quality product that will get the job done the first time.

Questions  We encourage all prospective buyers to contact us and ask any technical questions you may have on any of our tooling products.

International Shipping is also available at Discounted price.

Specialist Tools Australia (Division Of Responsive Engineering Australia Pty Ltd).
All products advertised are stocked in our Canberra warehouse – If you need more information, technical advice or assistance – we are here to help - We encourage customers to phone us prior to finalising your purchase to ensure you are purchasing the appropriate tools for your purpose Phone 02-6280 4334

Free shipping within Australia over $250. All parcels will be sent via regular Australia Post. Express post available upon request, additional charges will apply. International Shipping is also available.