Seat Cutting Tool For Compression Leak
Diesel Fuel Injectors Mercedes, Mazda, Jeep, Ford Transit, Land Rover etc (8PCS)

SA-3636G

This is also one our most popular seat cutting tool sets. This specialised tool has been developed to clean carbon from the injector bore and rectify injector seat non-conformity.

Identify injector “blow-by” exists (The leaking of combustion gas from cylinder through the injector seating washer, the blow-by causes starting symptoms and poor running, excessive smoke, tar build-up, loss and noise of compression).

To use tool
1: Gain access to the injectors and remove them (you may need injector removal tool).

2: Select required reamer onto pilot post and tighten internal hex screw.

3: Place assembled cutter into injector recess. Using the T bar and socket supplied: apply only a small amount of pressure whilst turning the cutter in a clockwise direction only. Use a small amount of light lubricant whilst performing the cut to reduce chattering and help to give a flat cut. Do not over cut the seat, only remove enough metal to form a good seat

4: Thoroughly clean the seat and remove all shavings.

5: Fit injectors using new heat shield washers as per manufacturers’ instructions.

Specialist Tools Australia (Division Of Responsive Engineering Australia Pty Ltd).
All products advertised are stocked in our Canberra warehouse – If you need more information, technical advice or assistance – we are here to help - We encourage customers to phone us prior to finalising your purchase to ensure you are purchasing the appropriate tools for your purpose Phone 02-6280 4334

Free shipping within Australia, All parcels will be sent via regular Australia Post. Express post available upon request, additional charges will apply. International Shipping is also available.